V1

V1 alert notifications

Default: disabled

Create an Android notification on this device for priority alerts that aren't muted.

V1 priority enabled

Default: disabled

V1 adds a priority tag to the alert it considers to be most important, and for which it is audibly alerting.

When enabled, JBV1 will try to make the V1 priority alert the app's priority alert. Any other alerts are sorted by mute state (not muted > muted), band (Laser > Ka > K > Ku > X), orientation (front|rear > side), and strength.

When disabled, the V1 priority tag is ignored, and all alerts are sorted as described above. The alert at the top of this sorted list is the priority alert.

V1 auto mode enabled

Default: disabled

While V1 is in USA mode, JBV1 can automatically change V1's analyzer mode based on speed thresholds.

Above mode

Default: LOGIC

The analyzer mode to use when your speed is greater than or equal to the selected threshold.

Below mode

Default: ADVANCED-LOGIC

The analyzer mode to use when your speed is below the selected threshold. When decelerating through the threshold, this analyzer mode is not used until your speed is less than or equal to threshold - 3, to avoid continuous mode switching when you're driving right at the threshold speed.

Speed threshold

Default: 60

Defines the speed threshold.

PSL threshold

Default: disabled

When the speed limit is known, the threshold will be set to the speed limit + the selected offset.

Remember changes

Default: enabled

Mode changes made directly to V1 by you in either state (Above or Below) will be remembered and used for the next change to the same state.

SHBC filter (Gen2 only)

Suspiciously High Bogey Count filter

1-bar alerts will be filtered out of the alert stream according to the thresholds for each band.

A 1-bar alert will NOT be filtered out if it's the V1 priority alert or the only remaining alert in its respective band.

For each band, the following settings are available: disabled, 4+, 5+, 6+, 7+, 8+, 9+.

Ka band

Default: disabled

K band

Default: disabled

X band

Default: disabled